Network Fault Monitoring RTU (Network Disconnection & Power failure Monitoring)
The Network Fault Monitoring RTU RTU5028E is special designed for remote monitoring Ethernet devices communication status and power supply status. It can detect the Ethernet device fault caused by power supply or network communication. If network communication fault, it can remote or automatically restart the switch, Router or device to solve issues, no need maintenance engineer to process, save time and maintenance costs. Support monitoring up to 7 network devices simultaneously.
When power supply failure, the Network Fault Monitoring RTU will alert the users by SMS or upload to cloud platform, so the users can know the Network devices disconnections are caused by power supply, can arrange the power supply maintaince engineer to solve the problem.
Network Fault Monitoring RTU will ping the local network devices and WAN internet, and can judge the disconnections are caused by WAN or LAN or devices, and can automatically restart the related Network devices, like Routers, Switches, Devices. or remote restart these devices by SMS or Cloud Platform. because of network device disconnection problems, almost all of them can be solved by restart devices, it can save time and maintaince cost.
| Item | Parameters |
| Power supply | 12VDC, support 9~36VDC |
| Power consumption | Standby: 100mA@12V; Max: 380mA@12V |
| Communication method | SMS, GPRS/3G/4G, Ethernet |
| Protocol | Modbus RTU Over TCP, Modbus TCP, MQTT |
| GSM/3G/4G | GSM: 850/900/1800/1900MHz 3G: 3G WCDMA 4G LTE: 4G LTE |
| Ethernet port | 1xRJ45, support DHCP dynamic obtain IP or static fixed IP |
| Relay output | 1 NC relay output; 7A/125VAC, 5A/250VAC, 20A/14VDC |
| SIM slot | 1.8V or 3.0V SIM card |
| Antenna | SMA antenna interface, 50ohm |
| Backup battery | 3.7V/900mAh(Last 2~3 hours) |
| Working temperature | -10°C~60°C |
| Working humidity | 95%(No condensation) |
| Dimension | 70mm x 88mm x 30mm |
Trafic Network Device Monitoring;
IP Camera Monitoring;
BTS Device Monitoring;
Other Network Device Monitoring.
The Network Fault Monitoring RTU RTU5028E is special designed for remote monitoring Ethernet devices communication status and power supply status. It can detect the Ethernet device fault caused by power supply or network communication. If network communication fault, it can remote or automatically restart the switch, Router or device to solve issues, no need maintenance engineer to process, save time and maintenance costs. Support monitoring up to 7 network devices simultaneously.
When power supply failure, the Network Fault Monitoring RTU will alert the users by SMS or upload to cloud platform, so the users can know the Network devices disconnections are caused by power supply, can arrange the power supply maintaince engineer to solve the problem.
Network Fault Monitoring RTU will ping the local network devices and WAN internet, and can judge the disconnections are caused by WAN or LAN or devices, and can automatically restart the related Network devices, like Routers, Switches, Devices. or remote restart these devices by SMS or Cloud Platform. because of network device disconnection problems, almost all of them can be solved by restart devices, it can save time and maintaince cost.
| Item | Parameters |
| Power supply | 12VDC, support 9~36VDC |
| Power consumption | Standby: 100mA@12V; Max: 380mA@12V |
| Communication method | SMS, GPRS/3G/4G, Ethernet |
| Protocol | Modbus RTU Over TCP, Modbus TCP, MQTT |
| GSM/3G/4G | GSM: 850/900/1800/1900MHz 3G: 3G WCDMA 4G LTE: 4G LTE |
| Ethernet port | 1xRJ45, support DHCP dynamic obtain IP or static fixed IP |
| Relay output | 1 NC relay output; 7A/125VAC, 5A/250VAC, 20A/14VDC |
| SIM slot | 1.8V or 3.0V SIM card |
| Antenna | SMA antenna interface, 50ohm |
| Backup battery | 3.7V/900mAh(Last 2~3 hours) |
| Working temperature | -10°C~60°C |
| Working humidity | 95%(No condensation) |
| Dimension | 70mm x 88mm x 30mm |
Trafic Network Device Monitoring;
IP Camera Monitoring;
BTS Device Monitoring;
Other Network Device Monitoring.
